How will you maintain your car in your own garage? Greater lift or rapid lift. From operation to use, from tire maintenance to chassis cleaning. The rapid rise and fall of LUXMAIN makes everything easy. You can do more with fewer LUXMAIN Quick Lifts.
LUXMIAN Portable Quick Lift is a convenient and portable electric hydraulic lifting system for automobiles, which can be lifted by directly using its own power supply. Get rid of dependence on road rescue, door-to-door services, car wash and beauty industry power supply and venues.
LUXMAIN has excellent waterproof and corrosion resistance. The whole frame can even be immersed in water.
|Model No||L-520E-1||Supply Voltage||DC12V|
|Frame spread length||1746mm||Mini Height||88mm|
|Frame Length||1468mm||Max.Lifting Height||460mm|
|Max.Lifting Capacity||2500kg||Single side width of lifting frame||315mm|
|Single frame weight||39kg||Power unit weight||20kg|
|rising/lowing time||20~30sec||oil tank capacity||4L|
The characteristics of Car Quick Lift: In the construction of the three-dimensional parking garage, it is often encountered that the self-propelled ramp cannot be adopted due to the small space. In order to transport the car to different levels to access the vehicle, vertical lifting is required. Car-specific lifts. This can replace the ramps of cars entering and leaving the garage, saving space and improving garage utilization. This type of car-specific lift is often used for underground or roof and building self-propelled garage access.
Position of Car Quick Lift: When setting up a car lift, it should be able to fully utilize the function of the parking lot and not hinder the entry and exit of the car. It should have the effect of smoothly and safely storing the car.
Entrance and exit setting: between the entrance and exit of the Car Quick Lift and the road ahead, the distance between the two lengths should be kept, or the space for setting the turntable should be reserved, but the elevators with the inlet and outlet modes are reserved for one length of space on the entrance side. . When the car enters and exits the elevator and does not have a reverse drive, a slewing platform should be provided in principle. The width of the entrance and exit of the car should be greater than the maximum width of the transport vehicle by more than 0.5M, and not less than 2.25 meters. The height should be more than 1.8 meters, and not less than the height of the suitable vehicle plus 0.1 meters.
Yantai Tonghe Precision Industry Co.,Ltd was founded in 2007, locates in Yantai City. We are a manufacturer of inground car lifts and a member of China Automobile Maintenance And Repair Equipment Trade Association.
Equipped with over 100 sets of advanced manufacturing equipments and precision inspection instruments, Yantai Tonghe dedicates in the design & development, manufacturing and services of inground lifts, hydraulic cylinder and hydraulic control system. The annual production capacity in inground car lifts reaches 10,000 sets, specialized high pressure oil cylinders reaches 40,000 pieces and hydraulic control system reaches 10,000 sets. The products are mainly car jack lift, Quick Lift, Inground Lift, etc. Our products are widely applied in Automotive Industry, Vehicle maintenance, Construction machinery etc.
1.How about the package of the quick lift and the capacity of one 20’container ?
The lifting frames are packaged individually in cartons and the power unit is packaged in wooden cases. Each 20-foot cabinet can hold 75 sets of equipment。
2.Can the quick lift be used on a sloped ground?
To the extent of ensuring the safety of vehicle and operator ,Slopped ground or non-hardened ground is not recommended used
Is Luxmain quick lift can be used on glass steel grille? What is the minimum thickness of glass steel grille
Can be used on glass steel grille , but the glass steel grille can not be overhead.
Shown as below:。
3.Can the power supply of LUXMAIN Quick Lift be 110V or 380V?
The 110V power supply can be realized by supporting the corresponding 110V power unit; for safety, the 380V power supply is not recommended.
By changing the power outlet, it can adapt to the power interface standards of all countries in the world.
4.What is the weight of Luxmain Quick Lift?
The single-sided lifting frame weighs approximately 42kg and is equipped with a roller that can be dragged or translated. The power unit is about 23kg.
5.What is the warranty of Luxmain Quick Lift ?
+86 535 6736715
Yantai Luxmain Car Lift Co., Ltd. products include:Movable Car Lift,Electric Car Lift,Off-road Car Lift,Two Post Car Lift,Single Post Car Lift,Single Post Hydraulic Lift,Hydraulic Inground Car Lift,One Post Car Washing Lift,Hydraulic Lifter,Heavy Truck Lift,Car Lift 2 Post